FluxPro UH-1620 — High-Speed Benchtop Centrifuge, 16,500 rpm
Our high speed centrifuge TG16-WS has a wide range of fixed-angle rotors, this all-purpose centrifuge can hold PCR tubes, test tubes, round-bottom tubes, and it provides extraordinary capacity with 4 x 100 ml in a fixed angle rotor. With an extensive range of rotors and accessories and high RCF values up to 19480 x g, it is suitable for a wide variety of applications.
Design
- Metal housing, metal lid, and stainless steel centrifuge chamber are autoclave-able and resistant detergents and disinfection liquids.
- Observations window on lid for speed calibration and noise measurement.
- Microprocessor control with frequency conversion A.C. motor drive
- LCD Display the parameters of Speed, Timer, RCF, Rotors, Program(Memory), Acceleration& Deceleration information and Error code information.
User friendly
- 3 levels damping for anti vibration. Programmable and storable, stores up to 30 programs and provides direct user access with one keystroke save. The stored parameter: combination remains in the memory even after the centrifugation has been switched off.
- Provides the 10 acceleration rates and 10 braking ramp, to effectively avoid secondary sedimentation, with better centrifugation effect.
- Automatic lid-locking and holding during rotor run
- Easily exchangeable rotors, special rotor connector which makes it easy to load and unload rotor.
Safety
- Produced according to international safety regulations (e.g. IEC 61010)
- Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
- Emergency lid-lock release when power failure.
- Gas hinge for lid drop protection.
| Specifications | |
| Model | FluxPro UH-1620 |
| Type | High-Speed Benchtop Centrifuge, 16,500 rpm |
| Speed Range | 0-16500 rpm adjustable |
| Max Speed | 16500 rpm |
| Speed Accuracy | ±10 rpm |
| Max Capacity | 4 × 100 ml |
| RCF Range | 0-19480 ×g adjustable |
| Max RCF | 19480 ×g |
| Timer | 0-99minutes adjustable |
| Display | LCD |
| Noise | < 58 dB(A) |
| Acceleration / Deceleration Rates | 0-- 9 |
| Motor / Drive | Frequency Converter motor |
| Dimensions (L × W × H) | 485 × 350 × 310 mm |
| Net Weight | 28 kg |
| Power Supply | AC220V,50Hz,10A,600W |
| Matched Rotors | Fixed angle rotors |
| Certification | CE, ISO13485,ISO9001, SFDA |
| Rotors & Accessories | |
| NO.1 Angle rotor | 12×1.5/2.2ml · 16500r/min · 19176xg · PP/PC tube |
| Adapter | 12×0.5/0.2ml · PP/PC tube |
| NO.2 Angle rotor | 12×5ml · 16500r/min · 19480xg · PP/PC tube |
| Adapter | 12×1.5ml · PP/PC tube |
| NO.3 Angle rotor | 12×10ml · 12000r/min · 13523xg · PP/PC tube |
| Adapter | 12×5ml · PP/PC tube |
| NO.4 Angle rotor | 24×1.5/2.2ml · 14000r/min · 19020xg · PP/PC tube |
| Adapter | 24×0.5/0.2ml · PP/PC tube |
| NO.5 Angle rotor | 36×1.5/2.2ml · 13000r/min · 15304xg · PP/PC tube |
| Adapter | 36×0.5/0.2ml · PP/PC tube |
| NO.6 Angle rotor | 12×8×0.2ml · 12000r/min · 16985xg · PCR 8-tube strips |
| NO.7 Angle rotor | 10×15ml · 11000r/min · 14069xg · PP/PC tube |
| Adapter | 10×10ml · PP/PC tube |
| Adapter | 10×5ml · PP/PC tube |
| NO.8 Angle rotor | 6×50ml · 11000r/min · 13122xg · PP/PC tube |
| Adapter | 6×15ml · PP/PC tube |
| Adapter | 6×10ml · PP/PC tube |
| Adapter | 6×5ml · PP/PC tube |
| Adapter | 6×1.5ml · PP/PC tube |
| NO.9 Angle rotor | 4×10/100ml · 10000r/min · 10979xg · PP/PC tube |
| Adapter | 4×50ml · PP/PC tube |
| Adapter | 4×15/10ml · PP/PC tube |
| Adapter | 4×5/1.5ml · PP/PC tube |
| Ordering | |
| Part Number | UH-1620 |
| Lead Time | 4–6 weeks ARO |
Specifications as published by the manufacturer; subject to change without notice. Contact sales@blazeasia.com to confirm rotor configuration for your tubes and volumes.
