Japan Unix Soldering Robots & Stations
Robotic iron-tip soldering, laser soldering and digital soldering stations from Japan Unix. Supplied in Singapore by Blaze Technology, from tip selection to installation, training and spare parts.
Japan Unix Range
Everything for repeatable soldering on the production line, from a single hand station to a fully automatic soldering cell.
Desktop and in-line robots that solder with a heated iron tip and automatic solder feed. Program the joint once and repeat it the same way every time.
- Desktop Cartesian robots and 5-axis models
- Automatic solder feeder with solder-jam and solder-out sensors
- Nitrogen tip caps for cleaner, brighter joints
- Custom-built cells and two-axis systems on request
Diode laser soldering heats only the joint, with no tip touching the part. Suited to tight access, very small pads and heat-sensitive components.
- Diode laser soldering heads and systems
- No tip wear or tip contact on the part
- Fine control of heat input per joint
- Can be fitted to a robot for automatic soldering
Unicon digital soldering stations for manual work, with fast heat recovery for lead-free solder.
- 100 W, 150 W and 300 W stations and hand pieces
- Handy Max station
- Brush-type tip cleaners
- Fume extraction duct sets
Standard, lead-free, coated and custom-made iron tips, plus the parts that keep a robot running.
- Iron tips for robots and stations, incl. custom shapes
- Heaters for soldering heads
- Solder feed sensors, nozzles and tubing
- Control boards and replacement parts
Where it is used
Through-hole components on PCBs, connectors and terminals, wire-to-board joints, automotive electronics, sensors and LED modules, and any joint that needs the same quality on every part.
Questions
Does Blaze supply Japan Unix soldering robots in Singapore?
Yes. Blaze Technology supplies Japan Unix soldering robots, laser soldering systems, soldering stations, tips, heaters and spare parts in Singapore and the region, with local installation, training and maintenance.
Can you make a custom soldering tip for my joint?
Yes. Besides standard and lead-free tips, custom tips can be made to suit the joint geometry, pad size and access around the part. Send us a drawing or photo of the joint.
Should I use iron-tip or laser soldering?
Iron-tip robotic soldering suits most through-hole and wire joints and has the lowest running cost. Laser soldering is non-contact, so it suits tight access, very small joints and heat-sensitive parts close to the joint. We can test your parts and recommend one.
Do you train operators?
Yes. Installation, operator training and maintenance are carried out by Blaze engineers, with support from the factory when needed.
Planning a soldering project?
Send us your part, joint photos and volume. We will recommend the right Japan Unix setup.