UV Lamps & Parts
UV-C Lamps, Sleeves & Parts
Replacement UV-C lamps, quartz sleeves, ballasts, monitors and safety parts for water, air and surface UV systems. Stocked and supported by Blaze Technology in Singapore.
254 nm
UV-C lamps
12
part types
1 year
typical lamp change
Product Range
UV Lamps, Sleeves and Parts
Keep your UV system at full strength. We supply parts for Blaze UV systems and for most other makes.
| Part | What it is for |
|---|---|
| Germicidal UV-C lamps (254 nm) | Standard, high-output, instant-start, cold-cathode and amalgam lamps for water, air and surface systems. |
| Quartz sleeves | Clear fused-quartz sleeves for UV water and tank sterilizers. Replace when cloudy, scratched or cracked. |
| Ballasts (power supplies) | Replacement electronic ballasts for single and multi-lamp systems. |
| Lampholders and connectors | Lamp sockets, end caps and O-rings. |
| UV intensity monitors | Measure UV inside a water sterilizer and alarm or shut off flow when UV falls too low. |
| Lamp-on indicators and lamp-failure alarms | Show at a glance that lamps are working; sound an alarm if one fails. |
| Safety sensors and interlocks | Door switches and motion sensors that switch UV off when people enter. |
| UV-C meters | Check UV-C intensity from fixtures and lamps. |
| Flow restrictors and solenoid valves | Keep flow within the sterilizer rating; shut off water if UV fails. |
| Stainless-steel and cartridge pre-filters | Sediment and carbon pre-filtration before UV. |
| UV safety shields | Shields that block UV-C around fixtures and open lamps. |
| UV-A (365 nm) blacklight fixtures | For inspection and fluorescent detection. |
Replacing a lamp in an existing system?
Send us a photo of the lamp label or the part number printed on the lamp, the model of the system, and the quantity. We will match the correct lamp, sleeve and O-rings and confirm price and delivery.
- ✓Change UV-C lamps about once a year in continuous use — output drops even if the lamp still lights
- ✓Clean or replace quartz sleeves when they look cloudy or coated
- ✓Always switch off power before opening a UV system; never look at a lit UV-C lamp
FAQ
Frequently Asked Questions
How do I know which replacement lamp I need?
Read the part number printed on the lamp or the label of the system, or send us a photo. We will match the lamp, sleeve and O-rings.
How often should UV-C lamps be changed?
About once a year in continuous use. UV-C output falls with age even while the lamp still lights, so do not wait for it to fail.