EIT UV Radiometers — from Blaze Technology Singapore
Measure UV irradiance and energy on LED and mercury-lamp curing lines, spot curing systems and germicidal UVC equipment. Blaze Technology supplies the EIT range in Singapore and helps you pick the right instrument.
EIT UV Measurement Range
EIT designs and builds UV radiometers and on-line measurement systems in Leesburg, Virginia, USA. Tell us your UV source and wavelength and we will recommend the model.
| Instrument | Type | Bands | What it does |
|---|---|---|---|
| LED curing radiometers | |||
| LEDCure | LED radiometer | One band: L-365, L-385, L-395 or L-405 | Irradiance and energy from UV LED systems, with an irradiance profile on the display |
| LEDCure Profiler | LED profiler | One band: L-365, L-385, L-395 or L-405 | As LEDCure, plus transfers the profile to a computer for analysis |
| Four Band LEDCure Profiler | LED profiler | All four: L-365, L-385, L-395, L-405 | Four-band LED measurement with computer profile transfer |
| LEDMAP | LED map / profiler | One or four L-bands | Irradiance, energy and temperature profiles at line speeds up to 400 ft/min (128–2048 Hz) |
| Broadband (mercury lamp) radiometers | |||
| UV Power Puck II | Radiometer | Four bands: UVA, UVB, UVC, UVV | Peak irradiance and energy density from broadband sources |
| UviCure Plus II | Radiometer | One band: UVA 320–390, UVB 280–320, UVC 250–260 or UVV 395–445 nm | Peak irradiance and energy; Standard 10 W, Mid 1 W or Low 100 mW ranges |
| MicroCure + DataReader | Miniature radiometer | One band | For digital printing and small parts too small for a puck; samples at 2048 Hz |
| Profilers and mapping | |||
| UV Power Puck II Profiler | Profiler | Four bands: UVA, UVB, UVC, UVV | Irradiance versus time to diagnose lamp and system performance |
| UviCure Plus II Profiler | Profiler | One band | Irradiance versus time for one band |
| PowerMAP II | Profiler / map | Four UV bands plus thermocouple | Compact USB profiler for UV and temperature profiles |
| Spot curing, on-line and germicidal | |||
| SpotCure | Spot-cure radiometer | Spot curing | Checks spot-lamp output, light-guide wear and light-guide position |
| EIT On-Line UV Measurement System | On-line monitor | Matched to the mercury or LED source | Continuous monitoring with 0–10 V or 4–20 mA output to your PLC |
| UVKey | UVC germicidal radiometer | 254 nm or 222 nm | UVC dose for hospitals, clinics, care homes and research; NIST-traceable |
Frequently Asked Questions
Why measure UV on a curing line?
UV lamps and LEDs lose output over time, and reflectors and light guides get dirty or worn. Measuring irradiance (mW/cm²) and energy (mJ/cm²) shows when a process has drifted before parts are under-cured.
Which EIT instrument do I need for UV LED curing?
Use an LEDCure or LEDCure Profiler with the L-band that matches your LED (365, 385, 395 or 405 nm), or the Four Band LEDCure Profiler if you run several wavelengths. LEDMAP suits fast digital printing lines.
Which EIT instrument do I need for mercury (arc) lamps?
The UV Power Puck II measures four bands (UVA, UVB, UVC, UVV) in one pass; the UviCure Plus II measures one band. Choose the Profiler versions to see irradiance over time.
Can EIT instruments check a UV spot curing lamp?
Yes. The SpotCure measures spot-lamp output and helps you see light-guide wear and position, which suits Incure spot lamps and other spot-cure systems.
Does Blaze Technology supply EIT in Singapore?
Yes. Blaze Technology Pte Ltd supplies EIT UV measurement instruments in Singapore and the region, and can recommend the right model for your Incure or other UV curing equipment. E-mail sales@blazeasia.com.