two part epoxy bl
> Home > Products > Two Part Epoxy

quipmen t

incure

Two Part Epoxy

INCURE offers a wide range of two part epoxies that are designed for specific end-use applications.
Sealing with INCURE compounds ensure long term integrity of your products. Available in custom formulations.


Need a sample? Fill in your request here

eco-PEN600 | eco-PEN450 | eco-PEN300
 No Drip or Stringing - Suck Back Option
un
Product No. 2-Part Viscosity (cP) Color Hardness Tg, ºC Water Absorption 25ºC, 24hr,% Pot Life Storage
6400 1:1 A:12,000-17,000
B:12,000-17,000		 A: Colorless
B: Light Yellow		 D84 52 2.6 3 min <25ºC / 12 mths
6401 2:1 A:13,000-19,000
B:12,000-18,000		 A: Milky White
B: Yellow		 D82 48-52 0.07 30 min <25ºC / 12 mths
6402 1:1 A:24000
B: 11500		 A:Grey
B: White		 D80 50 0.11 5-10 min 8-28ºC / 12 mths
6403 1:1 A:14000
B: 21000		 A: Colorless
B: Light Brown		 D80 50 0.11 30 min 8-28ºC / 12 mths
6404 1:1 A:15000
B: 20000		 A: Colorless
B: Brown		 D75-80 50 0.50 15 min 8-28ºC / 12 mths
6405 1:1 A:15000
B: 35000		 A: Colorless
B: Brown		 D75-80 50 0.50 30 min 8-28ºC / 12 mths
6406 100:20 A:165000
B: 11000		 A:White
B: Light Yellow		 D87 46 0.93 4-5 min 8-28ºC / 12 mths
6407 1:1 A:50000
B: 32000		 A:Gray
B: White		 D80 50 0.11 3-5 min 8-28ºC / 12 mths
6408 2:1 A:29000-34000
B: 14000-24000		 A:Black
B: Yellow		 D82 48-52 0.07 30 min <25ºC / 12 mths
6409 2:1 A:35000
B: 31000		 A:Black
B: Yellow		 D80-85 50 0.11 30 min 8-28ºC / 12 mths
6410 2:1 A:14000
B: 18500		 A:White
B: Yellow		 D75 80 0.38 30 min 8-28ºC / 12 mths
6411 2:1 A:10000
B: 7000		 A: Colorless
B: Light Yellow		 D80-85 50 <1.50 30 min 8-28ºC / 12 mths
6412 1:1 A:49000
B: 70000		 A: Colorless
B: Light Yellow		 D78 51 1.74 6 min 8-28ºC / 12 mths
6413 1:1 A:42500
B: 42500		 A: Colorless
B: Light Yellow		 D79 50 3.75 2-3 min 8-28ºC / 12 mths
6414 1:1 A:12000
B: 12000		 A: Colorless
B: Colorless		 D81 54 0.68 15-20 min 8-28ºC / 12 mths
6415 1:1 A: 3000-7000
B: 4000-8000		 A:Black
B: Yellow		 D70 88 0.32 30 min 14-34ºC / 12 mths
6416 1:1 A:110500
B: 37435		 A: Light Yellow B: Black D78 27 0.90 1 hr 8-28ºC / 12 mths
6417 2:1 A:17000-29000
B: 16000-36000		 A: Black
B: Yellow		 D75 55 0.80 20 min <25ºC / 12 mths
6418 1:1 A:676600
B: 195400		 A:Black
B: Yellow		 D76 40 0.26 20 min 8-28ºC / 6 mths
6419 1:1 A:40000-90000
B: 40000-90000		 A:White
B: Dark Green		 D75 26 0.71 8-13 min <25ºC / 12 mths
6420 2:1 A:150000
B: 25000		 A:White
B: Light Yellow		 D87 54 1.14 10 min 8-28ºC / 12 mths
6421 2:1 A:5750
B: 10500		 A: Colorless
B: Colorless		 D84 38 0.74 30 min 8-28ºC / 12 mths
6422 4:1 A:100000
B: 62500		 A: Milk White B: Milk White D43 43 2.02 3 hr 8-28ºC / 12 mths
6423 2:1 A:31000
B: 16500		 A: Milk White  B: Amber D80 43 0.22 50 min 8-28ºC / 12 mths
6424 2:1 A:45000
B: 19500		 A:White
B: Yellow		 D84 73 0.42 20 min 8-28ºC / 12 mths
6425 2:1 A:45000
B: 19500		 A:Black
B: Yellow		 D84 73 0.42 20 min 8-28ºC / 12 mths
6426 2:1 A:15500
B: 33000		 A:Black
B: Yellow		 D85 80 0.60 20-30 min 8-28ºC / 12 mths
6427 2:1 A:1125
B: 500		 A: Light Yellow B: Light Yellow D79 32 0.92 - 8-28ºC / 12 mths
6428 2:1 A:28000
B: 59500		 A:White
B: Yellow		 D76 62 0.24 20-30 min 8-28ºC / 12 mths
6429 2:1 A:310000
B: 98100		 A: Grey White
B: Brown		 D90 177 - 30 min 2-8ºC / 6 mths
6430 100:85 A:54500
B: 330000		 A:Beige
B: Grey		 D75 30 3.70 30 min 8-28ºC / 12 mths
6431 1:1 A:400
B: 800		 A:Black
B: Amber		 A48 -11 1.53 4-6 hr 8-28ºC / 12 mths
6432 100:100 A:3600
B: 60		 A: Colorless
B: Colorless		 D86 140 0.20 5-6 hr 8-28ºC / 12 mths
6433 1:1 A:3000
B: 12000		 A: Colorless
B: Light Yellow		 D43 14 0.32 3-5 min 8-28ºC / 12 mths
6434 1:1 A:100000
B: 80000		 A:White
B: Black		 D71 46 0.27 30 min 8-28ºC / 12 mths
6435 3:1 A:12300
B: 580		 A: Colorless
B: Yellow		 D60 91 2.00 10 min 8-28ºC / 12 mths
derfill

  .
    Help us to understand you more:
    1.  What are you using now? (CA / Urethane / Epoxy / Acrylic UV / Activator Cure Acryl / Hot Melt / Silicone etc.)      
    2.  What are the reasons for the change or is this a new project.
    3.  What is the end product? (Appliance, Notebook, Mobile Phone etc.)
    4.  What is the substrate / material? (ABS, PVC etc.)
    5.  What is the board size and coat thickness required?
    6.  Are there any shadowed areas?
    7.  What chemical is used and duration of the process?
    8.  What is the expected monthly production volume?
    9.  How do you plan to dispense and cure the proposed material? (Manual or Automation)

    What are the requirements for the following:
    1.   Viscosity (cps)
    2.   Hardness / Flexibility                                         
    3.   Colour, Clarity or Fluorescing needed
    4.   Military Specification
    5.   UL Recognized
    6.   Thermal Limit
    7.   Low Outgassing
    8.   Moisture Resistance
    9.   Surface / Volume Resistivity
    10. Curing Method (UV / Heat or Moisture)
    11. Others (please specify)

    What are the testings done:
    1.  Adhesion  
    2.  Thermal Shock / Cycle  
    3.  Electrical Properties
    4.  Moisture / Humidity / Solvent Resistance
    5.  Others (please specify)
   
    Email Us!
.


SINGAPORE
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 65 6270 2188
Fax 65 6270 9188		 MALAYSIA
PT1866 Tingkat Perusahaan 6
Prai Free Industrial Zone, 13600 Prai 
Penang, Malaysia
Tel 604 390 5882 
Fax 604 390 0082		 THAILAND
8 Soi Lasalle 77, Kwaeng Bangna, Khet Bangna
Bangkok 10260, Thailand
Tel 66 2361 2926, 66 2361 2927  
Fax 66 2361 2928		 HONG KONG
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 852 8199 0955  
Fax 65 6270 9188
blaze
©2012 Blaze Technology Pte Ltd, Specifications subject to change without notice.
Email: sales@blazeasia.com | Website: www.blazeasia.com
blaze