z
> Home > Products > Conformal Coatings
uv
uv

Light Curing Conformal Coatings.
Need a sample? Fill in your request here

DYMAX light curing conformal coatings cure tack free in seconds upon exposure to ultraviolet and/or visible light. Each conformal coating is solvent-free  and low VOC, eliminating the need for solvent handling while enhancing worker safety and minimizing environmental impact. DYMAX conformal coatings are one part, so no mixing is required and dispensing is trouble free. Each conformal coating is electrically insulated and may be applied over the entire surface or in select areas of a printed board to provide protection from service environments.

IPC-CC-830 approved, MIL I-46058C listed conformal coatings are available. Various grades, including multiple viscosities, clear, fluorescing, rigid, flexible, and black colored are also available. Secondary heat or moisture cure versions are available for boards with shadowed areas.

  
 

Do You Know?

BLAZE now provide batch conformal coating services using Dymax UV conformal coatings.  With our newly introduced CRPS (Cost Reduction Plant Survey), we conduct a Cost-Benefit Analysis before presenting to you what matters most to you; significant cost savings  and yet maintaining a 100% environmental compliance process with the use of Dymax 100% solids light-curing materials.  So hurry, send us your board for a free quote today or arrange for a free CRPS with one of our Applications Development Engineers.

BLAZE also conduct seminars that are well suited to the needs of corporate organisations who would like to give their employees and team members an informational experience on Conformal Coatings. 



Testimonials:


Conformal Coating
Applications
Viscosity
(nominal)
Cured Appearance
Fluoresces?
Approvals
Packages Sizes
Available
MSDS
New!  9481
 
Thin, chemically resistant conformal coatings. Recommended where shadowed conformal coating is present and components can not withstand heat cure.
125 cP

Clear
Yes, Blue
MIL-I-46058C • IPC-CC-830B
UL Recognized • Halogen Free
30 mL Syringe (MR)
400 mL Pouch
1 Liter Bottle
15 Liter Pail
9481
984-LVUF
 
Thin, chemically resistant conformal coatings
150 cP

Clear
Yes, Blue
MIL-I-46058 • IPC-CC-830
UL Recognized • Halogen Free
10 mL Syringe (MR)
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
1 Liter Bottle
15 Liter Pail
984-LVUF
987
Thin, chemically resistant conformal coatings; Recommended for difficult-to-wet components and assembly materials.
150 cP
 

Clear
Yes, Blue
MIL-I-46058 • IPC-CC-830
Halogen Free
10 mL Syringe (MR)
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
1 Liter Bottle
15 Liter Pail
987 
9-20351-UR
Thicker, flexible conformal coating; Recommended for applications where thermal shock performance is critical.
14,500 cP
Clear/Hazy
Yes, Red
Halogen Free
10 mL Syringe (MR)
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
1 Liter Bottle
15 Liter Pail
9-20351-UR
 
9-20557
 
Medium thickness, flexible conformal coatings
2,500 cP
Clear
Yes, Blue
MIL-I-46058 • IPC-CC-830
UL Recognized • Halogen Free
10 mL Syringe (MR)
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
1 Liter Bottle
15 Liter Pail
 9-20557
9-20557-LV
Thin, flexible conformal coatings
850 cP
Clear
Yes, Blue
MIL-I-46058 • IPC-CC-830
Halogen Free
10 mL Syringe (MR)
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
1 Liter Bottle
15 Liter Pail
9-20557-LV 
   
    Help us to understand you more:
    1.  What are you using now? (CA / Urethane / Epoxy / Acrylic UV / Activator Cure Acryl / Hot Melt / Silicone etc.)      
    2.  What are the reasons for the change or is this a new project.
     3.  What is the end product? (Appliance, Notebook, Mobile Phone etc.)
     4.  What is the substrate / material? (ABS, PVC etc.)
    5.  What is the board size and coat thickness required?
     6.  Are there any shadowed areas?
    7.  What chemical is used and duration of the process?
     8.  What is the expected monthly production volume?
     9.  How do you plan to dispense and cure the proposed material? (Manual or Automation)

    What are the requirements for the following:
    1.   Viscosity (cps)
    2.   Hardness / Flexibility                                         
    3.   Colour, Clarity or Fluorescing needed
    4.   Military Specification
    5.   UL Recognized
    6.   Thermal Limit
    7.   Low Outgassing
    8.   Moisture Resistance
    9.   Surface / Volume Resistivity
    10. Curing Method (UV / Heat or Moisture)
    11. Others (please specify)

    What are the testings done:
    1.  Adhesion  
    2.  Thermal Shock / Cycle  
    3.  Electrical Properties
    4.  Moisture / Humidity / Solvent Resistance
    5.  Others (please specify)
   
    Email Us!


hng Our Technical Capabilites

Adhesive selection, process development and product validation are critical to the success of any manufacturing process. BLAZE has a strong technical service team to assist you with UV curable adhesives applications and curing process equipment set up.

Having a policy of ongoing investment in training with sales and engineering teams, we ensure that good continuous training is provided in all aspects of UV curing, dispensing, applications, process intergration, performance monitoring and repair / maintenance services.
conformal coating, conformal, uv conformal coating, circuit board coating, pcb coating, epoxy coating, uv light curing conform
uval coating
SINGAPORE
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 65 6270 2188
Fax 65 6270 9188		 MALAYSIA
PT1866 Tingkat Perusahaan 6
Prai Free Industrial Zone, 13600 Prai 
Penang, Malaysia
Tel 604 390 5882 
Fax 604 390 0082		 THAILAND
8 Soi Lasalle 77, Kwaeng Bangna, Khet Bangna
Bangkok 10260, Thailand
Tel 66 2361 2926, 66 2361 2927  
Fax 66 2361 2928		 HONG KONG
33 Ubi Ave 3, #04-23 VERTEX
Singapore 408868
Tel 852 8199 0955  
Fax 65 6270 9188
blaze
©2012 Blaze Technology Pte Ltd, Specifications subject to change without notice.
Email: sales@blazeasia.com | Website: www.blazeasia.com
blaze